TPS40200MDREPG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -55°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 46V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Operating Supply Voltage | 52V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 95% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40200MDREPG4 Overview
Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~52V is the operating voltage and supply voltage of the dc control. Worked in an dc switcher with a -55°C~125°C TJ rating. A switching controller such as this can switch at a value of 35kHz~500kHz . It is suitable for general dc dc regulator when it is set to Surface Mount. For efficient switching control, the dcdc regulator features Frequency Control, Soft Start. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 8 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. TPS40200 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 8 pins. Statistically, DC regulator outputs 46V volts. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. There is a maximum frequency of 500kHz for this dc regulators. The value of DC to DC voltage regulator is set at ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE in order to fulfill the requirements more effectively. To run the voltage regulator dc to dc safely and reliably, users should apply 52V to the voltage regulator dc to dc. DC switching uses 1.5mA when it is dormant. Since the dc switcher's maximum input voltage is 52V, the voltage must be regulated accordingly. Voltage 4.5V is needed for the supply. Input current cannot exceed 3A with this dc switcher. The switching converter can output 46V volts at its utmost, according to the datasheet. Its lowest voltage output is not less than 700mV.
TPS40200MDREPG4 Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE
TPS40200MDREPG4 Applications
There are a lot of Texas Instruments TPS40200MDREPG4 DC to DC converter applications.
- Computed tomography (CT)
- Sensitive electronic devices
- Shearing machines
- Power supplies of electronic gadgets
- Elevator lighting
- Magnetohydrodynamic power
- Radio equipment
- Drilling machines
- Product testing
- Program control systems
