TPS40200QDRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 72.603129mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 46.8V |
| Output Type | Transistor Driver |
| Max Output Current | 300mA |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 95% |
| Height | 1.75mm |
| Length | 4.9mm |
| Width | 3.91mm |
| Thickness | 1.58mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40200QDRQ1 Overview
With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Tape & Reel (TR). With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~52V. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 35kHz~500kHz. dc dc regulator can be generalized using Surface Mount. In order to control switching efficiently, the dcdc regulator features Frequency Control, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . There are many different types of terminations for 8. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. A search for "TPS40200" will reveal other relevant dc to dc converter ics. Pins number 8 of switching converter in total. Statistically, the DC regulator outputs 46.8V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 300mA. A frequency of 500kHz is set for the switching controller. It belongs to the Automotive, AEC-Q100 series of dc to dc voltage regulator. During dormancy, the dc switching uses 1.5mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 52V due to the dc switcher's maximum input voltage. There must be a 4.5V supply voltage. There will be 300mA current output from the dc switcher above 300mA. Depending on the datasheet, the switching converter can output 46V volts at its peak. Its lowest voltage output is not less than 700mV.
TPS40200QDRQ1 Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
TPS40200QDRQ1 Applications
There are a lot of Texas Instruments TPS40200QDRQ1 DC to DC converter applications.
- Precision electronic equipment
- Planers
- Combined machine tools
- Direct power supply system
- Telecommunications equipment
- Radio equipment
- CNC system
- Industrial controllers
- Production lines
- Power supplies of electronic gadgets
