TPS40200SHKJ
| Parameters | |
|---|---|
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-CFlatpack |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~210°C TA |
| Packaging | Tube |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 45.24V |
| Terminal Position | DUAL |
| Base Part Number | TPS40200 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 45.24V |
| Output Type | Transistor Driver |
| Max Output Current | 3A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 3A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~52V |
| Quiescent Current | 1.5mA |
| Control Features | Frequency Control, Soft Start |
| Max Output Voltage | 46V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 35kHz~500kHz |
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 700mV |
| Switcher Configuration | SINGLE |
| Max Frequency | 500kHz |
| Max Duty Cycle | 93 % |
| Duty Cycle (Max) | 100% |
| Height | 1.65mm |
| Length | 6.9mm |
| Width | 5.65mm |
| Thickness | 1.65mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
TPS40200SHKJ Overview
In the 8-CFlatpack package, the switching controller meets most application requirements. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tube is used to package the PMIC. With Transistor Driver dc switching's output (s), it is able to handle it. A 5.5V~52V voltage is supplied to the dc control and used for operating it. A -55°C~210°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 35kHz~500kHz. dc dc regulator can be generalized using Surface Mount. DCDC regulator is controlled efficiently by Frequency Control, Soft Start. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. Different dc switching's functions can be applied to 8 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. Search for "TPS40200" to find other relevant dc to dc converter ics. There are a total of 8 pins on switching converter. The test statistics indicate that DC regulator outputs a voltage of 45.24V. normally, the dc dc regulator's output current is 3A, which you should keep in mind when starting a project. A duty cycle set at 93 % ensures voltage regulator dc to dc reliability during power-on and power-off. DC regulator has a maximum frequency of 500kHz. In order to satisfy the need, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 45.24V. When the dc switching is dormant, it uses 1.5mA. The dc switcher's maximum input voltage is 52V; users must limit it accordingly. 4.5V is the required supply voltage. There will be 3A output current greater than 3A from the dc switcher. Depending on the datasheet, the switching converter can output 46V volts at its peak. Its lowest voltage output is not less than 700mV.
TPS40200SHKJ Features
Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 93 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 45.24V
TPS40200SHKJ Applications
There are a lot of Texas Instruments TPS40200SHKJ DC to DC converter applications.
- Terrestrial set-top boxes
- Photovoltaic power
- Radio equipment
- Injection molding machinery
- Pipe bending machines
- Scientific testing
- Various CNC machine tools
- Servo drive system
- Nuclear power plants
- Various precision measuring detectors
