TPS40210DRCT

10 Terminals 4.5V~52V 10-Pin TPS40210 DC to DC converter ICSWITCHING REGULATOR 1 Outputs 35kHz~1MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40210DRCT
Package: 10-VFDFN Exposed Pad
Datasheet: PDF
Stock: 318
Description: 10 Terminals 4.5V~52V 10-Pin TPS40210 DC to DC converter ICSWITCHING REGULATOR 1 Outputs 35kHz~1MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad
Surface Mount	YES
Number of Pins	10
Weight	26.109911mg
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	10
Termination	SMD/SMT
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Frequency	1MHz
Base Part Number	TPS40210
Function	Step-Up, Step-Up/Step-Down
Number of Outputs	1
Output Voltage	260V
Output Type	Transistor Driver
Max Output Current	6A
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING REGULATOR
Output Configuration	Positive
Output Current	6A
Voltage - Supply (Vcc/Vdd)	4.5V~52V
Control Features	Enable, Frequency Control, Soft Start
Max Output Voltage	260V
Topology	Boost, Flyback, SEPIC
Min Input Voltage	4.5V
Control Mode	CURRENT-MODE
Frequency - Switching	35kHz~1MHz
Max Input Voltage	52V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	No
Min Output Voltage	5V
Max Duty Cycle	95 %
Clock Sync	Yes
Duty Cycle	95 %
Height	1mm
Length	3mm
Width	3mm
Thickness	900μm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40210DRCT Overview

Capsuled in the 10-VFDFN Exposed Pad package, the switching controller suits most application needs. For 1 outputs, the dc motor controller is appropriate. An enclosure of Tape & Reel (TR) is used to package the PMIC. Transistor Driver dc switching's outputs (s) are supported. A 4.5V~52V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~125°C TJ. There is a switch at 35kHz~1MHz that can be used with this controller. dc dc regulator can be generalized using Surface Mount. To provide efficient switching control, Enable, Frequency Control, Soft Start is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING REGULATOR. switching converters terminal (s) are designed to be at DUAL. 10 terminations with various dc switching's functions. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. TPS40210 can be used to locate other relevant dc to dc converter ics. The switching converter has a total of 10 pins. The type is a particular Switching Regulator or Controllers of switching converter. Based on the test statistics, DC regulator outputs voltage 260V. In most cases, the dc dc regulator's output current is 6A. This information should be noted when you begin working with the component. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 95 %. Switching controller operates at 1MHz Hz. The maximum input voltage of the dc switcher is 52V, so users need to limit the voltage accordingly. Voltage 4.5V must be supplied. DC switchers cannot produce output currents greater than 6A. At its maximum output, the switching converter can provide 260V volts. Lowest voltage output of the voltage controller must be greater than 5V.

TPS40210DRCT Features

Transistor Driver Outputs
Switching Frequency: 35kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
Frequency: 1MHz