TPS40211DGQRG4
| Parameters | |
|---|---|
| Max Input Voltage | 52V |
| Control Technique | PULSE WIDTH MODULATION |
| Max Duty Cycle | 95 % |
| Duty Cycle (Max) | 95 % |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | HTSSOP EP |
| Surface Mount | YES |
| Number of Pins | 10 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Output Voltage | 8V |
| Max Output Current | 6A |
| Input Voltage-Nom | 12V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 52V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Current - Output | 400mA |
| Quiescent Current | 1.5mA |
| Frequency (Max) | 1MHz |
| Voltage - Output | 250V |
| Topology | Boost |
| Min Input Voltage | 4.5V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
TPS40211DGQRG4 Overview
The switching controller fits in the HTSSOP EP package and is ideal for most applications. There is sufficient capacity to generate switching controller for outputs 1. A solid enclosure of Tape & Reel (TR) surrounds pmic. There is a switch at 1MHz that can be used with this controller. The switch converters are connected to a SWITCHING REGULATOR analog IC. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 10 of dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 12V. The switching converter has a total of 10 pins. There is a particular type of Switching Regulator or Controllers in switching converter. A 8V voltage of DC regulator was detected in the test statistics. During power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set to 95 %. Ideally, dc regulator should be kept at a temperature of -40°C or higher. There should be 125°C more than 125°C degrees Celsius in the machine. A total of 1 functions are present in the switch converters. The dc switching utilizes 1.5mA when it is in a dormant state. There is a design for voltage regulators switching with 10 pins. Maximum frequency of the controller is 1MHz. In order to limit the voltage of a dc switcher whose maximum input voltage is 52V, it must be limited by the user. Switching controllers with 400mA inputs are ideal for it. During normaloperations, it outputs a value of 250V. A voltage of 4.5V is required for the supply. There will be 6A output current greater than 6A from the dc switcher. Voltage rating is 52V.
TPS40211DGQRG4 Features
Switching Frequency: 1MHz
PULSE WIDTH MODULATION
Max Duty Cycle: 95 %
TPS40211DGQRG4 Applications
There are a lot of Texas Instruments TPS40211DGQRG4 DC to DC converter applications.
- Energy management systems
- Geothermal power
- Milling machines
- Alternators
- Adjustable voltage or current linear circuits
- Various precision measuring instruments
- Die casting equipment
- Current source circuits
- Television equipment
- Refrigerators of central air conditioners
