TPS40304ADRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40304 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.5V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 660kHz |
| Duty Cycle (Max) | 90% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40304ADRCR Overview
It comes in a 10-VFDFN Exposed Pad package, so switching controller can be used for most applications. For outputs of 1, this dc motor controller is suitable. There is a Tape & Reel (TR) solid enclosure around the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 3V~20V. Work well in dc switchers with a -40°C~125°C TJ. Using this switching controller, it is possible to switch at 600kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Power Good, Soft Start. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . Different dc switching's functions can be applied to 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics can be found by searching "TPS40304". There are only 10 pins on switching converter. Based on the test statistics, DC regulator outputs voltage 6.5V. DC regulators have a maximum frequency of 660kHz. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 20V. In a dormant state, the dc switching uses 2.5mA. In order to limit the voltage of a dc switcher whose maximum input voltage is 20V, it must be limited by the user. Switching controller is necessary to have a supply voltage of 3V. An output current greater than 25A cannot be provided by the dc switcher. Its datasheet indicates the switching converter can output a maximum of 18V volts.
TPS40304ADRCR Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS40304ADRCR Applications
There are a lot of Texas Instruments TPS40304ADRCR DC to DC converter applications.
- Various precision measuring instruments
- Milling machines
- Industrial controllers
- Magnetohydrodynamic power
- Emergency lighting monitoring equipment
- Textile machinery
- Sink circuits
- Hydro power
- Digital video recorders
- Geothermal power
