TPS40305DRCR

10 Terminals 3V~20V 10-Pin TPS40305 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 1.2MHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS40305DRCR
Package: 10-VFDFN Exposed Pad
Datasheet: -
Stock: 415
Description: 10 Terminals 3V~20V 10-Pin TPS40305 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 1.2MHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	10-VFDFN Exposed Pad
Surface Mount	YES
Number of Pins	10
Operating Temperature	-40°C~125°C TJ
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS40305
Function	Step-Down
Number of Outputs	1
Output Voltage	6.5V
Output Type	Transistor Driver
Max Output Current	25A
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	2.5mA
Output Configuration	Positive
Output Current	25A
Voltage - Supply (Vcc/Vdd)	3V~20V
Quiescent Current	2.5mA
Control Features	Enable, Power Good, Soft Start
Max Output Voltage	17V
Topology	Buck
Min Input Voltage	3V
Control Mode	VOLTAGE-MODE
Frequency - Switching	1.2MHz
Max Input Voltage	20V
Control Technique	PULSE WIDTH MODULATION
Rise Time	15ns
Synchronous Rectifier	Yes
Fall Time (Typ)	12 ns
Switcher Configuration	PUSH-PULL
Max Frequency	1.38MHz
Max Duty Cycle	85 %
Isolation	Non-Isolated
Clock Sync	No
Height	1mm
Length	3mm
Width	3mm
Thickness	900μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS40305DRCR Overview

In the 10-VFDFN Exposed Pad package, the switching controller meets most application requirements. There is enough capacity in the dc motor controller to generate the output for the 1 input. An enclosure of Tape & Reel (TR) is used to package the PMIC. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sA 3V~20V voltage is supplied to the dc control and used for operating it. A -40°C~125°C TJ dc switcher is not a problem. There is a switch at 1.2MHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Power Good, Soft Start is included in the dcdc regulator. A SWITCHING CONTROLLER analog IC is connected to the switch converters. DUAL are the position of the terminal of the switching converters. A variety of terminations with 10 of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS40305". In total, switching converter has 10 pins. Test statistics indicate DC regulator outputs 6.5V voltage. If you start a project, note down the dc dc regulator's usual output current of 25A. To ensure the reliability under power-up and power-down, the maximum duty cycle of the voltage regulator dc to dc is set as 85 %. This dc regulatorhas a max frequency of 1.38MHz. Users should apply 12V to operate the voltage regulator dc to dc safely and reliably. In a dormant state, the dc switching uses 2.5mA. In order to ensure the dc switcher's functionality, users must limit the voltage to 20V due to the dc switcher's maximum input voltage. There must be a 3V supply voltage. A dc switcher can only produce an output current of 25A. A datasheet states that the switching converter can output 17V volts at its maximum. The supply current is 2.5mA.