TPS40305DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40305 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 6.8V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Quiescent Current | 2.5mA |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 17V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 1.2MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 6.2V |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1.38MHz |
| Duty Cycle (Max) | 85% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40305DRCT Overview
As a result of 10-VFDFN Exposed Pad compact design, the switching controller is compatible with most applications. This dc motor controller can be used to generate outputs with 1 numbers. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). 3V~20V is the supply voltage and the operating voltage of the dc control. Qualified to work in an dc switcher with -40°C~125°C TJ. It can switch at 1.2MHz. A generalization of dc dc regulator can be made using Surface Mount. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of dc switching's functions can be performed on 10 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. In addition to "TPS40305", there are other relevant dc to dc converter ics you can find. There are a total of 10 pins on switching converter. According to the test statistics, DC regulator outputs 6.8V voltage. You should note that the dc dc regulator's usual output current is 10A. It is estimated that this dc regulatorhas a maximum frequency of 1.38MHz. In dormant mode, 2.5mA is used. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 20V. A voltage of 3V is required for the supply. Input current cannot exceed 25A with this dc switcher. Datasheets state the switching converter can output up to 17V volts. 6.2V voltage output is lower than 6.2V.
TPS40305DRCT Features
Transistor Driver Outputs
Switching Frequency: 1.2MHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS40305DRCT Applications
There are a lot of Texas Instruments TPS40305DRCT DC to DC converter applications.
- Product burn-in
- Automatic testing equipment
- Shearing machines
- Program control systems
- Communication system
- Digital video recorders
- Computer-related products
- Surface processing equipment
- Production lines
- Computer monitoring equipment of building
