TPS40400RHLT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40400 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 30V |
| Output Type | Transistor Driver |
| Max Output Current | 30A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1mA |
| Voltage - Supply (Vcc/Vdd) | 3V~20V |
| Quiescent Current | 6mA |
| Control Features | Power Good, Tracking |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz~2MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 2MHz |
| Max Duty Cycle | 90 % |
| Serial Interfaces | PMBus |
| Height | 1mm |
| Length | 5.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40400RHLT Overview
With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 3V~20V are the dc control's supply voltage and operating voltage, respectively. Suitable for working in an dc switcher that has a -40°C~125°C TJ. A switching controller such as this can switch at a value of 200kHz~2MHz . It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Power Good, Tracking for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the QUAD position. 24 terminations with a variety of function. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. You can find other relevant dc to dc converter ics by searching "TPS40400". 24 pins are present on switching converter. According to the test statistics, DC regulator outputs 30V voltage. You should note that the dc dc regulator's usual output current is 1mA. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 90 % during power-up and power-down. There is a maximum frequency of 2MHz on this dc regulators. When the dc switching is dormant, it uses 6mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 20V. Voltage 3V must be supplied. In this case, the dc switcher won't produce more than 30A watts of output current.
TPS40400RHLT Features
Transistor Driver Outputs
Switching Frequency: 200kHz~2MHz
Power Good, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 90 %
TPS40400RHLT Applications
There are a lot of Texas Instruments TPS40400RHLT DC to DC converter applications.
- Die casting equipment
- PSRR circuits
- Energy management systems
- Arc suppression circuits
- Network technology
- Solar power plants
- Large fire protection systems
- Electrical distribution systems
- Computer-related products
- ATMs
