TPS40422RHAT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 103.986051mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V; 6.5 VOLT OUTPUT ALSO AVAILABLE |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS40422 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.6V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 60A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~20V |
| Control Features | Frequency Control, Power Good |
| Max Output Voltage | 5.6V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Rise Time | 15ns |
| Synchronous Rectifier | Yes |
| Fall Time (Typ) | 12 ns |
| Min Output Voltage | 600mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 1MHz |
| Serial Interfaces | PMBus |
| Duty Cycle | 90 % |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS40422RHAT Overview
This switching controller fits most application requirements since it is packaged in a 40-VFQFN Exposed Pad package. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 4.5V~20V volts and has 4.5V~20V supply voltage. A -40°C~125°C TJ dc switcher is not a problem. Switching can be done at 100kHz~1MHz with this switching controller. The Surface Mount allows it to be used for dc dc regulator in general. DCDC regulator is controlled efficiently by Frequency Control, Power Good. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at QUAD. 40 terminations with a variety of function. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. There is a DC switcher's nominal voltage of 12V. Search for "TPS40422" to find other relevant dc to dc converter ics. Switching converter has a total of 40 pins. DC regulator outputs 5.6V voltage based on test statistics. You should note that the dc dc regulator's usual output current is 60A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator1MHz has the maximum frequency. In order to satisfy the need, DC to DC voltage regulator has a value of OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V; 6.5 VOLT OUTPUT ALSO AVAILABLE. In order to ensure the dc switcher's functionality, users must limit the voltage to 20V due to the dc switcher's maximum input voltage. There must be a 4.5V supply voltage. DC switchers cannot produce output currents greater than 20A. Datasheets indicate that the switching converter can output 5.6V volts at its maximum. Neither the voltage controller's lowest voltage output 600mVr its highest voltage output is less than 600mV.
TPS40422RHAT Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Frequency Control, Power Good
PULSE WIDTH MODULATION
OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 5.6V; 6.5 VOLT OUTPUT ALSO AVAILABLE
TPS40422RHAT Applications
There are a lot of Texas Instruments TPS40422RHAT DC to DC converter applications.
- Access control systems
- Sensitive electronic devices
- Injection molding machinery
- Industrial robots
- Telecommunications equipment
- Direct power supply system
- USB circuits
- Various CNC machine tools
- Geothermal power
- Analog precision reference circuits
