TPS43000PWG4
| Parameters | |
|---|---|
| Voltage - Output | 8V |
| Topology | Flyback, SEPIC |
| Min Input Voltage | 1.8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 9V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 800mV |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 2000kHz |
| Duty Cycle (Max) | 100 % |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | AUTOMATIC PFM MODE |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 16 |
| Number of Outputs | 1 |
| Max Output Current | 6A |
| Operating Supply Voltage | 9V |
| Input Voltage-Nom | 3.5V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 6A |
| Quiescent Current | 1mA |
| Frequency (Max) | 2MHz |
| Max Output Voltage | 8V |
TPS43000PWG4 Overview
As a result of TSSOP compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with various dc switching's functions. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's voltage input of 3.5V. There are only 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. DC to DC voltage regulator has a value of AUTOMATIC PFM MODE to better satisfy the need. For safe and reliable operation in a circuit, voltage regulator dc to dc is suggested that users apply 9V. Temperatures should be kept at -40°C or higher. DC regulator should run at a temperature 85°C higher than 85°C. In total, the switch converters have 1 function (s). During dormancy, the dc switching uses 1mA. Designing voltage regulators switchings with 16 pins is one of the most important aspects of the process. The controller can switch at the maximum frequency of 2MHz. In order to ensure the dc switcher's functionality, users must limit the voltage to 9V due to the dc switcher's maximum input voltage. A 6A input is ideal for this application. It outputs a value of 8V in normaloperating procedures. Voltage 1.8V is needed for the supply. The dc switcher will not provide an output current greater than 6A. Depending on the datasheet, the switching converter can output 8V volts at its peak. Lowest voltage output of the voltage controller must be greater than 800mV. 2000kHz is the top frequency at which this switching controller can switch.
TPS43000PWG4 Features
PULSE WIDTH MODULATION
AUTOMATIC PFM MODE
TPS43000PWG4 Applications
There are a lot of Texas Instruments TPS43000PWG4 DC to DC converter applications.
- Thermal power
- Fire elevators
- Automatic testing equipment
- Precision electronic equipment
- Access control systems
- Adjustable voltage or current linear circuits
- Digital precision reference circuits
- Low output voltage switching power supply circuits
- Combined machine tools
- Nuclear power plants
