TPS43061RTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS43061 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 58V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 38V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~38V |
| Quiescent Current | 600μA |
| Control Features | Enable, Frequency Control, Power Good, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Max Frequency | 1MHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS43061RTER Overview
With its 16-WFQFN Exposed Pad package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 1. PMIC is packaged in a solid enclosure of Cut Tape (CT). The system can process Transistor Driver dc switching's outputs (s). 4.5V~38V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~150°C TJ dc switcher. Switching can be done at 50kHz~1MHz with this switching controller. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. switching converters terminal (s) are designed to be at QUAD. Various 16 terminations. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "TPS43061". Pins number 16 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. This dc dc voltage regulator should be powered by a voltage of 4.5V. Statistically, DC regulator outputs 58V volts. If you start a project, note down the dc dc regulator's usual output current of 50mA. This Surface Mount makes DC switcher suitable for most prototypes and applications. There is a maximum frequency of 1MHz on this dc regulators. To run the voltage regulator dc to dc safely and reliably, users should apply 38V to the voltage regulator dc to dc. In dormant mode, 600μA is used.
TPS43061RTER Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Enable, Frequency Control, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS43061RTER Applications
There are a lot of Texas Instruments TPS43061RTER DC to DC converter applications.
- Servo drive system
- Injection molding machinery
- Digital video recorders
- Product burn-in
- Motor controller circuits
- Computer application technology
- Lathes
- Analog precision reference circuits
- Mobile phones
- Power supplies of electronic gadgets
