TPS43337QDAPRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 38-PowerTSSOP (0.240, 6.10mm Width) |
| Number of Pins | 38 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 38 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS43337 |
| Function | Step-Up, Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 3.447V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 40V |
| Input Voltage-Nom | 13V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4V~40V |
| Quiescent Current | 34μA |
| Control Features | Enable, Frequency Control, Power Good, Soft Start, Tracking |
| Input Voltage (Min) | 4V |
| Topology | Buck, Boost |
| Control Mode | CURRENT/VOLTAGE-MODE |
| Frequency - Switching | 150kHz~600kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | BUCK-BOOST |
| Max Frequency | 600kHz |
| Max Duty Cycle | 98.75 % |
| Duty Cycle (Max) | 90%, 98.75% |
| Output Phases | 2 |
| Height | 1.2mm |
| Length | 12.5mm |
| Width | 6.2mm |
| Thickness | 1.15mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS43337QDAPRQ1 Overview
The switching controller fits in the 38-PowerTSSOP (0.240, 6.10mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 3 numbers. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4V~40V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~125°C TJ dc switcher. There is a switch at 150kHz~600kHz that can be used with this controller. The Surface Mount value makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Power Good, Soft Start, Tracking. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. Thare switching converters has a terminal (s) at DUAL . 38 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 13V. TPS43337 can be searched for other relevant dc to dc converter ics. There are 38 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. dc dc voltage regulators should have a minimum input voltage of 4V. According to the test statistics, DC regulator outputs 3.447V voltage. If you start a project, note down the dc dc regulator's usual output current of 1.5A. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 98.75 %. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. It is estimated that this dc regulatorhas a maximum frequency of 600kHz. A circuit should contain 40V in order to ensure the voltage regulator dc to dc runs safely and reliably. Automotive, AEC-Q100 series dc to dc voltage regulator belong to this series. DC switching uses 34μA when it is dormant.
TPS43337QDAPRQ1 Features
Transistor Driver Outputs
Switching Frequency: 150kHz~600kHz
Enable, Frequency Control, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 98.75 %
TPS43337QDAPRQ1 Applications
There are a lot of Texas Instruments TPS43337QDAPRQ1 DC to DC converter applications.
- Automation technology
- Thermal power
- Precision electronic equipment
- Imported equipment
- Bending machines
- Window air conditioners
- Textile machinery
- Magnetohydrodynamic power
- Program control systems
- Post equipment
