TPS5100IPW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 1MHz |
| Base Part Number | TPS5100 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 2.5V~7V |
| Quiescent Current | 3.5mA |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Boost, Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 7V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 4mA |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5100IPW Overview
As a result of 16-TSSOP (0.173, 4.40mm Width) compact design, the switching controller is compatible with most applications. It is sufficient to generate 3 outputs with this dc motor controller. An enclosure of Tube is used to package the PMIC. There are Transistor Driver dc switching's output (s) that it can handle. The supply and operating voltage of the dc control are 2.5V~7V. Qualified to work in a -40°C~85°C TA dc switcher. The switching controller can be switched at 50kHz~1MHz. dc dc regulator is made easier with Surface Mount. Switching control is made easier with the dcdc regulator's Dead Time Control, Enable, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . The 16 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 3.3V. Searching "TPS5100" will return other relevant dc to dc converter ics. Switching converter has a total of 16 pins. In particular, switching converter is a type of Switching Regulator or Controllers. 2.5V should be the minimum input voltage for the dc dc voltage regulator. At most, the dc to dc regulator accepts 7V input voltage. DC switcher's Surface Mount qualifies it for most applications and prototypes. Switching controllers work at 1MHz Hz. When running the voltage regulator dc to dc in a circuit, users should apply 7V to ensure safety and reliability. In dormant mode, 3.5mA is used. It is not recommended to supply more current to the controller than 4mA.
TPS5100IPW Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Frequency: 1MHz
TPS5100IPW Applications
There are a lot of Texas Instruments TPS5100IPW DC to DC converter applications.
- Remotely powered electric motors
- Automatic testing equipment
- Constant current circuits
- Flexible manufacturing cells
- Plate bending machines
- Milling machines
- Handheld GPS
- Textile machinery
- Computer rooms
- Sink circuits
