TPS5100IPWR
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 61.887009mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 500kHz |
| Base Part Number | TPS5100 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 3.05V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 7V |
| Input Voltage-Nom | 3.3V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 40mA |
| Voltage - Supply (Vcc/Vdd) | 2.5V~7V |
| Control Features | Dead Time Control, Enable, Frequency Control |
| Input Voltage (Min) | 2.5V |
| Topology | Boost, Buck-Boost |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 50kHz~1MHz |
| Input Voltage (Max) | 7V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 100% |
| Output Phases | 1 |
TPS5100IPWR Overview
It comes in a 16-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 3 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 2.5V~7V. Worked in a -40°C~85°C TA dc switcher before. Switching can be done at 50kHz~1MHz with this switching controller. The Surface Mount value makes it suitable for general dc dc regulator. To ensure efficient switching, this dcdc regulator features a Dead Time Control, Enable, Frequency Control. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 3.3V. You can find other relevant dc to dc converter ics by searching "TPS5100". The switching converter has a total of 16 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. It is recommended to use 2.5V as the minimum input voltage of dc dc voltage regulator. A 3.05V voltage of DC regulator was detected in the test statistics. Considering the dc to dc regulator can only accept 7V input voltage, it is important to take note of this. You should note down the dc dc regulator's usual output current of 40mA when you start a project. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is 500kHz frequency setting on the switching controller. It is suggested that users apply 7V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit.
TPS5100IPWR Features
Transistor Driver Outputs
Switching Frequency: 50kHz~1MHz
Dead Time Control, Enable, Frequency Control
PULSE WIDTH MODULATION
Frequency: 500kHz
TPS5100IPWR Applications
There are a lot of Texas Instruments TPS5100IPWR DC to DC converter applications.
- Ball screw pair
- Thermal power
- Plate bending machines
- Driver circuits
- Automatic plug-in machines
- Serial communication converter
- Sensitive electronic devices
- Electrical distribution systems
- Program control systems
- Imported equipment
