TPS51113DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPS51113 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 35V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Output Power | 2.61W |
| Control Features | Enable, Power Good |
| Accuracy | 1 % |
| Max Output Voltage | 35V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 13.2V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | -3V |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 72% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS51113DRCT Overview
The switching controller fits in the 10-VFDFN Exposed Pad package and is ideal for most applications. For outputs of 1, this dc motor controller is suitable. Cut Tape (CT) solid enclosure protects the pmic. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThis dc control operates at 4.5V~13.2V and has a 4.5V~13.2V supply voltage. Work well in dc switchers with a -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. For efficient switching control, the dcdc regulator features Enable, Power Good. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. switching converters terminal (s) are designed to be at DUAL. A variety of terminations with 10 of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Searching "TPS51113" will return other relevant dc to dc converter ics. Total pins of switching converter are 10. DC regulator outputs 35V voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 1.5A. Switching controller operates at 300kHz Hz. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 13.2V. Voltage 4.5V is needed for the supply. Input current cannot exceed 10A with this dc switcher. Datasheets indicate that the switching converter can output 35V volts at its maximum. Neither the voltage controller's lowest voltage output -3Vr its highest voltage output is less than -3V.
TPS51113DRCT Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 300kHz
TPS51113DRCT Applications
There are a lot of Texas Instruments TPS51113DRCT DC to DC converter applications.
- Computed tomography (CT)
- Electrical distribution systems
- Magnetohydrodynamic power
- Smart grid
- Pipe bending machines
- Shearing machines
- Telecommunications equipment
- Wide-range voltage regulation circuits
- Constant current circuits
- Computer-related products
