TPS51117PWG4
| Parameters | |
|---|---|
| Package / Case | TSSOP |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 57.209338mg |
| JESD-609 Code | e4 |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Pin Count | 14 |
| Number of Outputs | 1 |
| Max Output Current | 10A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Temperature Grade | INDUSTRIAL |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Current - Output | 10A |
| Quiescent Current | 400μA |
| Frequency (Max) | 550kHz |
| Max Output Voltage | 5.5V |
| Voltage - Output | 5.5V |
| Min Input Voltage | 1.8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 95 % |
| Height | 1.15mm |
| Length | 5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
TPS51117PWG4 Overview
It comes in a TSSOP package, so switching controller can be used for most applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. A variety of 14 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Switching converter has a total of 14 pins. Specially, switching converter corresponds to type Switching Regulator or Controllers. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V in order to better satisfy the requirement. To run the voltage regulator dc to dc safely and reliably, users should apply 5.5V to the voltage regulator dc to dc. At -40°C and above, dc regulator should be kept. A temperature of 85°C degrees Celsius is recommended. In total, the switch converters have 1 function (s). DC switching uses 400μA when it is dormant. Designing voltage regulators switchings with 14 pins is one of the most important aspects of the process. The controller can switch at the maximum frequency of 550kHz. Since the dc switcher's maximum input voltage is 28V, the voltage must be regulated accordingly. A 10A input is ideal for this application. Normally, it outputs a value of 5.5V. 1.8V is the required supply voltage. There will be 10A current output from the dc switcher above 10A. At its maximum output, the switching converter can provide 5.5V volts. Neither the voltage controller's lowest voltage output 760mVr its highest voltage output is less than 760mV.
TPS51117PWG4 Features
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
TPS51117PWG4 Applications
There are a lot of Texas Instruments TPS51117PWG4 DC to DC converter applications.
- Milling machines
- Servo drive system
- Computer application technology
- CMM
- Computer-related products
- Computer rooms
- Cutting machine tools
- Network technology
- Arc suppression circuits
- Window air conditioners
