TPS51117RGYT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 32.205058mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 400μA |
| Control Features | Enable, On Time Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 550kHz |
| Switching Frequency | 500kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51117RGYT Overview
As a result of 14-VFQFN Exposed Pad compact design, the switching controller is compatible with most applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. dc controls with 4.5V~5.5V voltage are supplied and operated. Suitable for working in an dc switcher that has a -40°C~85°C TA. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, On Time Control, Power Good is included in the dcdc regulator. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of 14 terminations are available in dc switching. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. A search for "TPS51117" will reveal other relevant dc to dc converter ics. 14 pins are on switching converter. Particularly, switching converter is a type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 5.5V voltage. It's important to remember that the dc dc regulator's normaloutput current is 10A, so you should note it down when starting a new project. DC regulator's maximum frequency is 550kHz. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V. D-CAP? series dc to dc voltage regulator belong to this series. In dormant mode, 400μA is used. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 28V. Voltage 1.8V must be supplied. An output current greater than 10A cannot be provided by the dc switcher. Datasheets indicate that the switching converter can output 5.5V volts at its maximum. voltage controllers with a minimum voltage output of 760mV cannot operate. The frequency at which this controller can perform well is 500kHz.
TPS51117RGYT Features
Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
Switching Frequency: 500kHz
TPS51117RGYT Applications
There are a lot of Texas Instruments TPS51117RGYT DC to DC converter applications.
- Bending machines
- Program control systems
- Automatic plug-in machines
- CNC system
- Scientific testing
- Hydrogen power
- Radio equipment
- Access control systems
- Electrical distribution systems
- Printing equipment
