TPS51117RGYTG4
| Parameters | |
|---|---|
| Control Features | Enable, On Time Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 1.8V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 550kHz |
| Switching Frequency | 500kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height | 1mm |
| Length | 3.5mm |
| Width | 3.5mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 14-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 14 |
| Weight | 32.205058mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51117 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 400μA |
TPS51117RGYTG4 Overview
Capsuled in the 14-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. DC control operates at 4.5V~5.5V volts and has 4.5V~5.5V supply voltage. A -40°C~85°C TA dc switcher is not a problem. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Enable, On Time Control, Power Good which allows efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position QUAD . There are many different types of terminations for 14. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5V. TPS51117 can be searched for other relevant dc to dc converter ics. There are 14 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. According to the test statistics, DC regulator outputs 5.5V voltage. You should note that the dc dc regulator's usual output current is 10A. 550kHz is the maximum frequency of this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V is used to better suit the DC to DC voltage regulator's situation. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 5.5V. It belongs to the D-CAP? series of dc to dc voltage regulator. Dormant dc switchings use 400μA. In order to ensure the dc switcher's functionality, users must limit the voltage to 28V due to the dc switcher's maximum input voltage. Voltage 1.8V is necessary for the supply. Output current will not exceed 10A. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. At least 760mV voltage is output by the voltage controller. At 500kHz, this controller will mostly work as expected.
TPS51117RGYTG4 Features
Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.75 TO 5.5V
Switching Frequency: 500kHz
TPS51117RGYTG4 Applications
There are a lot of Texas Instruments TPS51117RGYTG4 DC to DC converter applications.
- Planers
- Imported equipment
- Flexible manufacturing cells
- Digital precision reference circuits
- Injection molding machinery
- Network technology
- Bending machines
- Flaw detection equipment
- Precision electronic equipment
- Automatic plug-in machines
