TPS51124RGERG4

24 Terminals 4.5V~5.5V 24-Pin TPS51124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS51124RGERG4
Package: 24-VFQFN Exposed Pad
Datasheet: PDF
Stock: 738
Description: 24 Terminals 4.5V~5.5V 24-Pin TPS51124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	24-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	24
Weight	45.387587mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory	Switching Regulator or Controllers
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS51124
Function	Step-Down
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	28V
Input Voltage-Nom	5V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~5.5V
Quiescent Current	350μA
Control Features	Enable, On Time Control, Power Good
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	3V
Control Mode	VOLTAGE-MODE
Max Input Voltage	28V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	760mV
Switcher Configuration	PUSH-PULL
Max Frequency	420kHz
Clock Sync	No
Duty Cycle	88 %
Output Phases	1
Height	1mm
Length	4mm
Width	4mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS51124RGERG4 Overview

As a result of 24-VFQFN Exposed Pad compact design, the switching controller is compatible with most applications. For 2 outputs, the dc motor controller is appropriate. Tape & Reel (TR) solid enclosure protects the pmic. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~5.5V. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount allows it to be used for dc dc regulator in general. For efficient switching control, the dcdc regulator features Enable, On Time Control, Power Good. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. Different dc switching's functions can be applied to 24 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 5V is input. You can find other relevant dc to dc converter ics by searching "TPS51124". 24 pins are present on switching converter. In particular, switching converter is a type of Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 5.5V. In most cases, the dc dc regulator's output current is 20A. This information should be noted when you begin working with the component. DC regulator's maximum frequency is 420kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 28V. Thare are switch converters of the D-CAP? series. Dormant dc switchings use 350μA. The maximum input voltage of the dc switcher is 28V, so users need to limit the voltage accordingly. A voltage of 3V must be present in the supply. DC switcher will not be able to provide an output current above 15A volts. As per its datasheet, the switching converter has a maximum output of 5.5V volts. Lowest voltage output of the voltage controller must be greater than 760mV.