TPS51124RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 420kHz |
| Base Part Number | TPS51124 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~5.5V |
| Quiescent Current | 350μA |
| Control Features | Enable, On Time Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency | 420kHz |
| Clock Sync | No |
| Duty Cycle | 88 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51124RGET Overview
In the 24-VFQFN Exposed Pad package, the switching controller meets most application requirements. For outputs of 2, this dc motor controller is suitable. PMIC is packaged in a solid enclosure of Tape & Reel (TR). The program can handle Transistor Driver dc switching's outputs (s). 4.5V~5.5V is the operating voltage and supply voltage of the dc control. A -40°C~85°C TA dc switcher is not a problem. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Enable, On Time Control, Power Good. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. There are a QUAD terminal on the switching converters. An array of 24 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input of 5V. Searching "TPS51124" will return other relevant dc to dc converter ics. There are 24 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. Based on the test statistics, DC regulator outputs voltage 5.5V. You should note down the dc dc regulator's usual output current of 15A when you start a project. Switching controller operates at 420kHz Hz. There are several dc to dc voltage regulator in the D-CAP? series. In dormant mode, 350μA is used. In order to limit the voltage of a dc switcher whose maximum input voltage is 28V, it must be limited by the user. Voltage 3V must be supplied. DC switcher will not be able to provide an output current above 15A volts. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. 760mV voltage output is lower than 760mV. At 420kHz, this controller will mostly work as expected.
TPS51124RGET Features
Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
Frequency: 420kHz
Switching Frequency: 420kHz
TPS51124RGET Applications
There are a lot of Texas Instruments TPS51124RGET DC to DC converter applications.
- Printing
- Smoke prevention equipment
- Power supplies of electronic gadgets
- CNC system
- Driver circuits
- Communication system
- Precision electronic equipment
- CMM
- ATMs
- Ball screw pair
