TPS51125ARGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51125 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 5.5V~28V |
| Quiescent Current | 550μA |
| Control Features | Enable, On Time Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 5.5V |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 2V |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 460kHz |
| Clock Sync | No |
| Duty Cycle | 93 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51125ARGER Overview
This switching controller fits most application requirements since it is packaged in a 24-VFQFN Exposed Pad package. There is sufficient capacity to generate switching controller for outputs 2. There is a Tape & Reel (TR) solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. 5.5V~28V is the supply voltage and the operating voltage of the dc control. Worked in a -40°C~85°C TA dc switcher before. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Enable, On Time Control, Power Good. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. switching converters terminal (s) are designed to be at QUAD. Different dc switching's functions can be applied to 24 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Searching "TPS51125" will return other relevant dc to dc converter ics. Pins number 24 of switching converter in total. Statistically, the DC regulator outputs 5.5V voltage. There is a maximum frequency of 460kHz on this dc regulators. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V. D-CAP? is a series of dc to dc voltage regulator. In dormant mode, 550μA is used. The maximum input voltage of the dc switcher is 28V, so users need to limit the voltage accordingly. Voltage 5.5V must be supplied. An output current greater than 20A cannot be provided by the dc switcher. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. There is 2V voltage output lower than 2V on the voltage controller.
TPS51125ARGER Features
Transistor Driver Outputs
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
TPS51125ARGER Applications
There are a lot of Texas Instruments TPS51125ARGER DC to DC converter applications.
- Correction machines
- Pipe bending machines
- Adjustable voltage or current linear circuits
- Access control systems
- Laboratories
- Scientific research
- Sensitive electronic devices
- seismic instrument power circuits
- Overvoltage protection circuits in TV sets
- Medical equipment
