TPS51125ARGET

24 Terminals 5.5V~28V 24-Pin TPS51125 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS51125ARGET
Package: 24-VFQFN Exposed Pad
Datasheet: -
Stock: 117
Description: 24 Terminals 5.5V~28V 24-Pin TPS51125 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS51125
Function	Step-Down
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	12V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Operating Supply Current	550μA
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	5.5V~28V
Quiescent Current	550μA
Control Features	Enable, On Time Control, Power Good
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	5.5V
Max Input Voltage	28V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	2V
Switcher Configuration	PUSH-PULL
Max Frequency	460kHz
Isolation	Non-Isolated
Switching Frequency	270kHz
Clock Sync	No
Duty Cycle	93 %
Output Phases	1
Height	1mm
Length	4mm
Width	4mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	24-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	24

TPS51125ARGET Overview

With a 24-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. dc motor controller is suitable for 2 output generation. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. The system can process Transistor Driver dc switching's outputs (s). A 5.5V~28V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. dc dc regulator is made easier with Surface Mount. In order to control switching efficiently, the dcdc regulator features Enable, On Time Control, Power Good. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. A variety of terminations with 24 of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. TPS51125 can be used to locate other relevant dc to dc converter ics. Pins number 24 of switching converter in total. As determined by the test statistics, the output voltage of DC regulator is 5.5V. You should note down the dc dc regulator's usual output current of 20A when you start a project. This dc regulatorhas a max frequency of 460kHz. A circuit should contain 12V in order to ensure the voltage regulator dc to dc runs safely and reliably. It belongs to the dc to dc voltage regulator series D-CAP?. A dc switching in a dormant state uses 550μA. In order to ensure the dc switcher's functionality, users must limit the voltage to 28V due to the dc switcher's maximum input voltage. There must be a 5.5V supply voltage. There will be 20A current output from the dc switcher above 20A. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. A supply current of 550μA is used to power it. Neither the voltage controller's lowest voltage output 2Vr its highest voltage output is less than 2V. When this switching controller is running at frequency 270kHz, it can perform well in most cases.