TPS51163DRCR
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51163 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 28V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13.2V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Power Good |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 600kHz |
| Max Input Voltage | 13.2V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 660kHz |
| Max Duty Cycle | 69 % |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
TPS51163DRCR Overview
This switching controller fits most application requirements since it is packaged in a 10-VFDFN Exposed Pad package. There is enough capacity in the dc motor controller to generate the output for the 1 input. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching's4.5V~13.2V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~85°C TA rating. Using this switching controller, it is possible to switch at 600kHz. A generalization of dc dc regulator can be made using Surface Mount. Featured in the dcdc regulator is Enable, Power Good which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 10 terminations with a variety of function. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPS51163". There are 10 pins on switching converter. Test statistics indicate DC regulator outputs 28V voltage. If you start a project, note down the dc dc regulator's usual output current of 1.5A. It is set to 69 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. DC regulator660kHz has the maximum frequency. To operate the voltage regulator dc to dc safely and reliably, users should apply 13.2V. The maximum input voltage of dc switcher is 13.2V, so users should limit their voltage accordingly. Voltage 4.5V is needed for the supply.
TPS51163DRCR Features
Transistor Driver Outputs
Switching Frequency: 600kHz
Enable, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 69 %
TPS51163DRCR Applications
There are a lot of Texas Instruments TPS51163DRCR DC to DC converter applications.
- Product testing
- Grinders
- Alternators
- Computer application technology
- Radio equipment
- Communication system
- Special machining machine tools
- Large fire protection systems
- Medical equipment
- Experimental setup
