TPS51163DRCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 600kHz |
| Base Part Number | TPS51163 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.6V |
| Output Type | Transistor Driver |
| Max Output Current | 10A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 10A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~13.2V |
| Control Features | Enable, Power Good |
| Max Output Voltage | 28V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 13.2V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Duty Cycle (Max) | 69% |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
TPS51163DRCT Overview
Capsuled in the 10-VFDFN Exposed Pad package, the switching controller suits most application needs. dc motor controller is suitable for 1 output generation. Packaged in solid enclosures, this pmic has a Tape & Reel (TR) rating. Transistor Driver dc switching's outputs (s) are supported. 4.5V~13.2V is the supply voltage and the operating voltage of the dc control. Work well in dc switchers with a -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. Enable, Power Good is used for efficient switching control in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. DUAL are the position of the terminal of the switching converters. 10 terminations with various dc switching's functions. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's voltage input of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS51163". The switching converter has a total of 10 pins. Statistically, DC regulator outputs 1.6V volts. The dc dc regulator's usual output current is 10A, which should be noted down when you start a project. A frequency of 600kHz is used by the switching controller. The dc switcher's maximum input voltage is 13.2V; users must limit it accordingly. Voltage 4.5V is necessary for the supply. An output current greater than 10A cannot be provided by the dc switcher. As per its datasheet, the switching converter has a maximum output of 28V volts.
TPS51163DRCT Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 600kHz
TPS51163DRCT Applications
There are a lot of Texas Instruments TPS51163DRCT DC to DC converter applications.
- Post equipment
- Precision electronic equipment
- Direct power supply system
- Terrestrial set-top boxes
- Pipe bending machines
- Analog precision reference circuits
- Digital precision reference circuits
- Photovoltaic power
- Injection molding machinery
- Automatic plug-in machines
