TPS5120DBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPS5120 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 26V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 26V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5120DBT Overview
It comes in the 30-TFSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. The dc motor controller is adquate to generate for 2 outputs. Packaging for the pmic consists of Tube solid enclosures. There are Transistor Driver dc switching's output (s) that it can handle. dc control's supply and operating voltages are 4.5V~28V. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Surface Mount makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start provides dcdc regulator efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. Thare switching converters has a terminal (s) at DUAL . A variety of terminations with 30 of dc switching. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 7V is input. Other relevant dc to dc converter ics will be returned if you search "TPS5120". 30 pins are on switching converter. Based on the test statistics, DC regulator outputs voltage 26V. If you start a project, note down the dc dc regulator's usual output current of 20A. A frequency of 300kHz is set for the switching controller. The dc switching utilizes 1.1mA when it is in a dormant state. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. Voltage 4.5V must be supplied. A dc switcher can only produce an output current of 20A. The datasheet indicates that the switching converter can output 26V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 900mV.
TPS5120DBT Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
TPS5120DBT Applications
There are a lot of Texas Instruments TPS5120DBT DC to DC converter applications.
- Digital precision reference circuits
- Automatic plug-in machines
- Computer rooms
- Plate bending machines
- Product burn-in
- Telecommunications equipment
- Automatic testing equipment
- Production lines
- Hydro power
- Handheld GPS
