TPS5120DBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPS5120 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 24V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 874mW |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good, Soft Start |
| Max Output Voltage | 26V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5120DBTG4 Overview
The switching controller fits in the 30-TFSOP (0.173, 4.40mm Width) package and is ideal for most applications. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tube solid enclosure. Transistor Driver dc switching's outputs (s) are supported. This dc control has a supply voltage and operating voltage of 4.5V~28V. Suitable for a -40°C~85°C TA dc switcher. The Surface Mount allows it to be used for dc dc regulator in general. To ensure efficient switching, this dcdc regulator features a Enable, Power Good, Soft Start. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. The switching converters's terminals (s) are designed at DUAL. 30 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 7V. Searching "TPS5120" will return other relevant dc to dc converter ics. There are a total of 30 pins on switching converter. DC regulator outputs 24V voltage according to the test statistics. You should note down the dc dc regulator's usual output current of 1.5A when you start a project. Switching controller operates at 300kHz Hz. As long as the dc switching is in a dormant state, it utilizes 1.1mA. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 4.5V. DC switcher will not be able to provide an output current above 20A volts. Its datasheet indicates the switching converter can output a maximum of 26V volts. There is 900mV voltage output lower than 900mV on the voltage controller.
TPS5120DBTG4 Features
Transistor Driver Outputs
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
Frequency: 300kHz
TPS5120DBTG4 Applications
There are a lot of Texas Instruments TPS5120DBTG4 DC to DC converter applications.
- Servo drive system
- Elevator lighting
- Computed tomography (CT)
- Lathes
- Printing equipment
- Grinders
- Laboratories
- Domestic water pumps
- ATMs
- Handheld GPS
