TPS5120MDBTREP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS5120 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 200mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5120MDBTREP Overview
The switching controller fits in the 30-TFSOP (0.173, 4.40mm Width) package and is ideal for most applications. 2 outputs can be generated with the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sdc control's supply and operating voltages are 4.5V~28V. Worked in a -55°C~125°C TA dc switcher before. The switching controller is capable of switching at the 300kHz position. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Power Good, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. The 30 terminations can be used for a wide range of dc switching. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. DC switcher's input voltageis set to 7V. Searching "TPS5120" will return other relevant dc to dc converter ics. 30 pins are present on switching converter. Statistically, DC regulator outputs 900mV volts. If you start a project, note down the dc dc regulator's usual output current of 1.5A. DC regulators have a maximum frequency of 500kHz. Users should apply 28V to operate the voltage regulator dc to dc safely and reliably. DC switching uses 1.1mA when it is dormant. The maximum input voltage of dc switcher is 28V, so users should limit their voltage accordingly. A voltage of 4.5V is required for the supply. Input current cannot exceed 1.5A with this dc switcher.
TPS5120MDBTREP Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS5120MDBTREP Applications
There are a lot of Texas Instruments TPS5120MDBTREP DC to DC converter applications.
- Emergency lighting monitoring equipment
- Printing equipment
- Pipe bending machines
- Milling machines
- Game consoles
- Lathes
- Photovoltaic power
- SMT equipment
- Post equipment
- Computer-related products
