TPS5120QDBTRQ1G4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS5120 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 900mV |
| Output Type | Transistor Driver |
| Max Output Current | 1.5A |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 7V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 1.5A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good, Soft Start |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Dropout Voltage | 200mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 83% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5120QDBTRQ1G4 Overview
The switching controller fits in the 30-TFSOP (0.173, 4.40mm Width) package and is ideal for most applications. For outputs of 2, this dc motor controller is suitable. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. It is capable of handling Transistor Driver dc switching's outputs (s). 4.5V~28V is the operating voltage and supply voltage of the dc control. Suitable for a -40°C~125°C TJ dc switcher. This switching controller can switch at 300kHz. The Surface Mount value makes it suitable for general dc dc regulator. Switching control is made easier with the dcdc regulator's Enable, Power Good, Soft Start. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. A switching converters's terminal (s) sits at the DUAL position. A variety of dc switching's functions can be performed on 30 terminations. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 7V. TPS5120 can be searched for other relevant dc to dc converter ics. There are 30 pins on switching converter. DC regulator outputs 900mV voltage according to the test statistics. If you start a project, note down the dc dc regulator's usual output current of 1.5A. This dc regulatorhas a max frequency of 500kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V. Automotive, AEC-Q100 is a series of dc to dc voltage regulator. The dc switching utilizes 1.1mA when it is in a dormant state. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. Voltage 4.5V is necessary for the supply. An output current greater than 1.5A cannot be provided by the dc switcher.
TPS5120QDBTRQ1G4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good, Soft Start
PULSE WIDTH MODULATION
TPS5120QDBTRQ1G4 Applications
There are a lot of Texas Instruments TPS5120QDBTRQ1G4 DC to DC converter applications.
- Elevator lighting
- Communication system
- Electrical distribution systems
- Automatic plug-in machines
- Access control systems
- CMM
- Large fire protection systems
- Ball screw pair
- Packaging
- Television equipment
