banner_page

TPS51217DSCT

10 Terminals 4.5V~6.5V 10-Pin TPS51217 DC to DC converter ICSWITCHING REGULATOR 1 Outputs Transistor Driver


  • Manufacturer: Texas Instruments
  • Nocochips NO: 815-TPS51217DSCT
  • Package: 10-WFDFN Exposed Pad
  • Datasheet: -
  • Stock: 266
  • Description: 10 Terminals 4.5V~6.5V 10-Pin TPS51217 DC to DC converter ICSWITCHING REGULATOR 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-WFDFN Exposed Pad
Number of Pins 10
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Series D-CAP™
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 2 (1 Year)
Number of Terminations 10
Termination SMD/SMT
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 2.6V
Subcategory Switching Regulator or Controllers
Terminal Position DUAL
Peak Reflow Temperature (Cel) 260
Supply Voltage 5V
Terminal Pitch 0.5mm
Frequency 340kHz
Base Part Number TPS51217
Function Step-Down
Number of Outputs 1
Output Voltage 2.6V
Output Type Transistor Driver
Max Output Current 20A
Operating Supply Voltage 6.5V
Input Voltage-Nom 5V
Analog IC - Other Type SWITCHING REGULATOR
Output Configuration Positive
Output Current 20A
Voltage - Supply (Vcc/Vdd) 4.5V~6.5V
Quiescent Current 320μA
Output Power 1.54W
Control Features Enable, Power Good
Max Output Voltage 2.6V
Topology Buck
Control Mode VOLTAGE-MODE
Max Input Voltage 28V
Control Technique PULSE WIDTH MODULATION
Supply Current-Max (Isup) 0.5mA
Synchronous Rectifier Yes
Min Output Voltage 600mV
Switcher Configuration PUSH-PULL
Clock Sync No
Duty Cycle 89 %
Height 800μm
Length 3mm
Width 3mm
Thickness 750μm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

TPS51217DSCT Overview


With a 10-WFDFN Exposed Pad package, the switching controller is suitable for a wide range of applications. 1 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~6.5V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~85°C TA rating. The Surface Mount allows it to be used for dc dc regulator in general. Enable, Power Good provides dcdc regulator efficient switching control. The switch converters are connected to an analog IC with a SWITCHING REGULATOR output. Terminal (s) of the switching converters are designed at the DUAL position. Various 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The nominal DC switcher's voltage input is 5V. Search for "TPS51217" to find other relevant dc to dc converter ics. There are only 10 pins on switching converter. Switching converter type is specifically Switching Regulator or Controllers. As determined by the test statistics, the output voltage of DC regulator is 2.6V. You should note down the dc dc regulator's usual output current of 20A when you start a project. This Surface Mount makes DC switcher suitable for most prototypes and applications. The switching controller works at a frequency of 340kHz. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 2.6V to better satisfy the requirement. To run the voltage regulator dc to dc safely and reliably, users should apply 6.5V to the voltage regulator dc to dc. There are several dc to dc voltage regulator in the D-CAP? series. During dormancy, the dc switching uses 320μA. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. There must be a voltage supply of 5V volts. A dc switcher can only produce an output current of 20A. The controller should not be supplied with more current than 0.5mA. At its maximum output, the switching converter can provide 2.6V volts. At its lowest voltage, the voltage controller does not produce less than 600mV.

TPS51217DSCT Features


Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 340kHz
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6V TO 2.6V

TPS51217DSCT Applications


There are a lot of Texas Instruments TPS51217DSCT DC to DC converter applications.

  • Hydrogen power
  • Fire elevators
  • Packaging
  • Various CNC machine tools
  • Servo drive system
  • Digital precision reference circuits
  • Gear/thread machining machines
  • Experimental setup
  • Computer-related products
  • Combined machine tools

Write a review

Note: HTML is not translated!
    Bad           Good