TPS51218DSCR

10 Terminals 4.5V~6.5V 10-Pin TPS51218 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS51218DSCR
Package: 10-WFDFN Exposed Pad
Datasheet: PDF
Stock: 889
Description: 10 Terminals 4.5V~6.5V 10-Pin TPS51218 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Contact Plating	Gold
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-WFDFN Exposed Pad
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	10
ECCN Code	EAR99
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 2.6V
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	0.5mm
Base Part Number	TPS51218
Function	Step-Down
Number of Outputs	1
Output Voltage	2.6V
Output Type	Transistor Driver
Operating Supply Voltage	6.5V
Input Voltage-Nom	5V
Analog IC - Other Type	SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~6.5V
Quiescent Current	320μA
Control Features	Enable, Frequency Control, Power Good
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	0.5mA
Synchronous Rectifier	Yes
Switcher Configuration	PUSH-PULL
Max Frequency	465kHz
Clock Sync	No
Duty Cycle	91 %
Height	800μm
Length	3mm
Width	3mm
Thickness	750μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS51218DSCR Overview

Capsuled in the 10-WFDFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 1 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~6.5V. Worked in a -40°C~85°C TA dc switcher before. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, Frequency Control, Power Good for efficient switching control. SWITCHING CONTROLLER analog IC connects the switch converters. Switching converters are designed with the terminal (s) at position DUAL . A variety of 10 terminations are available in dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. TPS51218 can be used to locate other relevant dc to dc converter ics. Pins number 10 of switching converter in total. Switching converter is a type of Switching Regulator or Controllers in particular. 4.5V should be the minimum input voltage for the dc dc voltage regulator. The test statistics indicate that DC regulator outputs a voltage of 2.6V. You should note down the dc dc regulator's usual output current of 20A when you start a project. In most applications and prototypes, DC switcher's Surface Mount makes it suitable. There is a maximum frequency of 465kHz on this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 2.6V is used to better suit the DC to DC voltage regulator's situation. To run the voltage regulator dc to dc safely and reliably, users should apply 6.5V to the voltage regulator dc to dc. The dc to dc voltage regulator is from the D-CAP? series. As long as the dc switching is in a dormant state, it utilizes 320μA. The supply voltage must be 5V. There should be 0.5mA current exceeding 0.5mA supplied to the controller.