TPS51219RTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP™, D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51219 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 2V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Quiescent Current | 560μA |
| Control Features | Enable, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 670kHz |
| Switching Frequency | 400kHz |
| Clock Sync | No |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51219RTET Overview
It comes in a 16-WFQFN Exposed Pad package, so switching controller can be used for most applications. 1 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sDC control operates at 3V~28V volts and has 3V~28V supply voltage. Suitable for work in a -40°C~85°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. Enable, Power Good is used for efficient switching control in the dcdc regulator. The switch converters are connected to a SWITCHING CONTROLLER analog IC. QUAD are the position of the terminal of the switching converters. Different dc switching's functions can be applied to 16 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "TPS51219". Pins number 16 of switching converter in total. In particular, switching converter belongs to the Switching Regulator or Controllers family. An input voltage of 4.5V is the minimum required for the dc dc voltage regulator. DC regulator outputs 2V voltage based on test statistics. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulators have a maximum frequency of 670kHz. To operate the voltage regulator dc to dc safely and reliably, users should apply 5.5V. Thare are switch converters of the D-CAP?, D-CAP2? series. In dormant mode, 560μA is used. The supply voltage should be 5V. In most cases, this controller will perform well at frequency 400kHz.
TPS51219RTET Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Switching Frequency: 400kHz
TPS51219RTET Applications
There are a lot of Texas Instruments TPS51219RTET DC to DC converter applications.
- Hydrogen power
- Game consoles
- Packaging
- Smart grid
- Low output voltage switching power supply circuits
- Flaw detection equipment
- Boring machines
- Bending machines
- Sensitive electronic devices
- Thermal power
