TPS5124DBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 300kHz |
| Base Part Number | TPS5124 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Power Dissipation | 874mW |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 12V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 21V |
| Min Output Voltage | 900mV |
| Switcher Configuration | PUSH-PULL |
| Input Current | 1.1mA |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5124DBT Overview
With its 30-TFSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. dc motor controller is suitable for 2 output generation. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~15V and has a 4.5V~15V supply voltage. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. The Surface Mount makes it ideal for general dc dc regulator. Enable, Power Good provides dcdc regulator efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. Terminal (s) of the switching converters are designed at the DUAL position. 30 terminations with a variety of function. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. In addition to "TPS5124", there are other relevant dc to dc converter ics you can find. There are a total of 30 pins on switching converter. Test statistics indicate DC regulator outputs 12V voltage. You should note that the dc dc regulator's usual output current is 20A. Switching controller operates at 300kHz Hz. In dormant mode, 1.1mA is used. You can set the input voltage to 21V for nominal working status. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 15V. Switching controller is necessary to have a supply voltage of 4.5V. DC switchers cannot produce output currents greater than 20A. At its maximum output, the switching converter can provide 12V volts. Lowest voltage output of the voltage controller must be greater than 900mV. For operation, the switching converter could be satisfied with 1.1mA current flow input.
TPS5124DBT Features
Transistor Driver Outputs
Enable, Power Good
PULSE WIDTH MODULATION
Frequency: 300kHz
TPS5124DBT Applications
There are a lot of Texas Instruments TPS5124DBT DC to DC converter applications.
- Post equipment
- Window air conditioners
- Product testing
- Flaw detection equipment
- Refrigerators of central air conditioners
- Network technology
- Low output voltage switching power supply circuits
- Game consoles
- Computer rooms
- Digital video recorders
