TPS5124DBTR

30 Terminals 4.5V~15V 30-Pin TPS5124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 300kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS5124DBTR
Package: 30-TFSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 799
Description: 30 Terminals 4.5V~15V 30-Pin TPS5124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs 300kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mounting Type	Surface Mount
Package / Case	30-TFSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	30
Weight	97.49401mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	30
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS5124
Function	Step-Down
Number of Outputs	2
Output Voltage	12V
Output Type	Transistor Driver
Max Output Current	20A
Operating Supply Voltage	15V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	20A
Voltage - Supply (Vcc/Vdd)	4.5V~15V
Quiescent Current	1.1mA
Control Features	Enable, Power Good
Max Output Voltage	12V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Frequency - Switching	300kHz
Max Input Voltage	15V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	900mV
Switcher Configuration	PUSH-PULL
Max Frequency	500kHz
Max Duty Cycle	80 %
Clock Sync	No
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS5124DBTR Overview

It comes in the 30-TFSOP (0.173, 4.40mm Width) package, which makes switching controller suitable for most applications. It is sufficient to generate 2 outputs with this dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. Transistor Driver dc switching's outputs (s) can be handled by it. A 4.5V~15V voltage is supplied to the dc control and used for operating it. Qualified to work in an dc switcher with -40°C~85°C TA. With this switching controller, you can switch at 300kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. Featured in the dcdc regulator is Enable, Power Good which allows efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminals (s) are designed at DUAL. A variety of 30 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. TPS5124 can be used to locate other relevant dc to dc converter ics. Pins number 30 of switching converter in total. Based on the test statistics, DC regulator outputs voltage 12V. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. A duty cycle set at 80 % ensures voltage regulator dc to dc reliability during power-on and power-off. There is a maximum frequency of 500kHz for this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 15V. As long as the dc switching is in a dormant state, it utilizes 1.1mA. The dc switcher's maximum input voltage is 15V, so users must limit the voltage accordingly. 4.5V is the required supply voltage. A dc switcher can only produce an output current of 20A. Depending on the datasheet, the switching converter can output 12V volts at its peak. Neither the voltage controller's lowest voltage output 900mVr its highest voltage output is less than 900mV.