TPS5124DBTRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 30-TFSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 30 |
| Weight | 97.49401mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 30 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS5124 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Operating Supply Voltage | 15V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~15V |
| Quiescent Current | 1.1mA |
| Control Features | Enable, Power Good |
| Max Output Voltage | 12V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 300kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 500kHz |
| Duty Cycle (Max) | 80% |
| Clock Sync | No |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5124DBTRG4 Overview
Capsuled in the 30-TFSOP (0.173, 4.40mm Width) package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 2. PMIC packaging is solid with a Tape & Reel (TR) enclosure. It is capable of handling Transistor Driver dc switching's outputs (s). A 4.5V~15V voltage is supplied to the dc control and used for operating it. Suitable for a -40°C~85°C TA dc switcher. This switching controller can switch at 300kHz. dc dc regulators can be carried out with Surface Mount. To provide efficient switching control, Enable, Power Good is included in the dcdc regulator. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a DUAL terminal on the switching converters. There are many different types of terminations for 30. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 12V. You can find other relevant dc to dc converter ics by searching "TPS5124". Switching converter has a total of 30 pins. A 12V voltage of DC regulator was detected in the test statistics. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. DC regulators have a maximum frequency of 500kHz. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably. When the dc switching is dormant, it uses 1.1mA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 15V. Voltage 4.5V must be supplied. Output current will not exceed 20A. At its maximum output, the switching converter can provide 12V volts. 900mV voltage output is lower than 900mV.
TPS5124DBTRG4 Features
Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Power Good
PULSE WIDTH MODULATION
TPS5124DBTRG4 Applications
There are a lot of Texas Instruments TPS5124DBTRG4 DC to DC converter applications.
- Computer-related products
- Radio equipment
- Milling machines
- Adjustable voltage or current linear circuits
- Linear guide
- Access control systems
- Die casting equipment
- Game consoles
- Servo drive system
- Digital video recorders
