TPS51513RHBT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -10°C~100°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP+™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS51513 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 1.05V |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Quiescent Current | 2mA |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Max Output Voltage | 1.05V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz 300kHz 350kHz 500kHz |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 700mV |
| Max Frequency | 500kHz |
| Clock Sync | No |
| Duty Cycle | 90 % |
| Height | 1mm |
| Length | 5mm |
| Width | 5mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51513RHBT Overview
Capsuled in the 32-VFQFN Exposed Pad package, the switching controller suits most application needs. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 3V~28V and has a 3V~28V supply voltage. Suitable for work in a -10°C~100°C TA dc switcher. With this switching controller, you can switch at 250kHz 300kHz 350kHz 500kHz. dc dc regulator is made easier with Surface Mount. Current Limit, Enable, On Time Control, Power Good is used for efficient switching control in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Thare switching converters has a terminal (s) at QUAD . 32 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's input voltageis set to 5V. Other relevant dc to dc converter ics will be returned if you search "TPS51513". The switching converter has a total of 32 pins. Test statistics indicate DC regulator outputs 1.05V voltage. You should note that the dc dc regulator's usual output current is 25A. This dc regulatorhas a max frequency of 500kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5.5V. D-CAP+? is a series of dc to dc voltage regulator. A dc switching in a dormant state uses 2mA. Because the dc switcher's maximum input voltage is 28V users must limit the voltage accordingly. The supply voltage must be 3V. Output current will not exceed 25A. At its maximum, the switching converter can output 1.05V volts. There is 700mV voltage output lower than 700mV on the voltage controller.
TPS51513RHBT Features
Transistor Driver Outputs
Switching Frequency: 250kHz 300kHz 350kHz 500kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
TPS51513RHBT Applications
There are a lot of Texas Instruments TPS51513RHBT DC to DC converter applications.
- Textile machinery
- CNC system
- Servo drive system
- Printing
- Adjustable voltage or current linear circuits
- Gear/thread machining machines
- Balance equipment
- Product burn-in
- Computer rooms
- Plate bending machines
