TPS51604QDSGRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS51604 |
| Number of Outputs | 2 |
| Max Output Current | 4A |
| Max Supply Current | 600μA |
| Input Type | Non-Inverting |
| Rise / Fall Time (Typ) | 30ns 8ns |
| Interface IC Type | PUSH-PULL BASED MOSFET DRIVER |
| Channel Type | Synchronous |
| Turn On Time | 10 μs |
| Output Peak Current Limit-Nom | 4A |
| Driven Configuration | Half-Bridge |
| Gate Type | N-Channel MOSFET |
| High Side Driver | YES |
| Logic Voltage - VIL, VIH | 0.6V 2.65V |
| Turn Off Time | 15 μs |
| High Side Voltage - Max (Bootstrap) | 35V |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51604QDSGRQ1 Overview
A higher degree of flexibility is achieved by adopting its 8-WFDFN Exposed Pad package.A package of Tape & Reel (TR) has been used.Gate drivers is mounted in the way of Surface Mount.WGate driversh a 4.5V~5.5V supply voltage, gate drivers is able to demonstrate Gate driverss superiorGate driversy.Gate drivers is designed wGate driversh a gate type of N-Channel MOSFET.This device is allowed to operate in a temperature range of -40°C~125°C TJ.Mosfet driver accepts input of type Non-Inverting.The configuration starts with 8 terminations.The base part number TPS51604 refers to a number of related parts.Mounting the device requires Surface Mount.As a result, it is configured with 8 pins when it is designed.Mosfet driver is specifically designed to opeate wMosfet driverh a supply voltage of 5V.The interface IC of the device is PUSH-PULL BASED MOSFET DRIVER.The maximum output current can amount to 4A.High-side voltage - Max (Bootstrap) can be as low as 35V.Mosfet driver has been integrated wMosfet driverh a total of 2 outputs for Mosfet drivers basis.The supply current should be kept at 600μA to ensure higher stability.A gate driver in the Automotive, AEC-Q100 series is included in this document.
TPS51604QDSGRQ1 Features
Embedded in the Tape & Reel (TR) package
Employing a gate type of N-Channel MOSFET
8 pins
High-side voltage - Max (Bootstrap) of 35V
Operating with the supply voltage of Automotive, AEC-Q100
TPS51604QDSGRQ1 Applications
There are a lot of Texas Instruments TPS51604QDSGRQ1 gate drivers applications.
- Power factor correction (PFC) circuits
- Line drivers
- Industrial Motor Inverter - Power Tools, Robotics
- Motor Controls
- Commercial air-conditioning (CAC)
- High power buffers
- Active filtering
- Smart Phones
- High current laser/LED systems
- Portable Media Players
