TPS51727RHAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Weight | 103.986051mg |
| Operating Temperature | -10°C~100°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP+™, Eco-Mode™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Power Management Circuits |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS51727 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 5V |
| Power Supplies | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 8A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Control Features | Current Limit, Enable, On Time Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 200kHz 300kHz 400kHz 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 500kHz |
| Output Voltage-Min | 0.4V |
| Clock Sync | No |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS51727RHAR Overview
It comes in a 40-VFQFN Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. 3V~28V is the operating voltage and supply voltage of the dc control. A -10°C~100°C TA dc switcher is not a problem. Using this switching controller, it is possible to switch at 200kHz 300kHz 400kHz 500kHz. It is suitable for general dc dc regulator when it is set to Surface Mount. The dcdc regulator features Current Limit, Enable, On Time Control, Power Good for efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the QUAD position. An array of 40 terminations of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5V. Other relevant dc to dc converter ics can be found by searching "TPS51727". 40 pins are present on switching converter. The type is a particular Power Management Circuits of switching converter. This dc dc voltage regulator should be powered by a voltage of 4.5V. If you start a project, note down the dc dc regulator's usual output current of 8A. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. DC regulator's maximum frequency is 500kHz. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 28V. D-CAP+?, Eco-Mode? is a series of dc to dc voltage regulator. Voltage 5V must be supplied.
TPS51727RHAR Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 400kHz 500kHz
Current Limit, Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
TPS51727RHAR Applications
There are a lot of Texas Instruments TPS51727RHAR DC to DC converter applications.
- Precision electronic equipment
- Various precision measuring instruments
- Computer rooms
- Surface processing equipment
- Energy management systems
- Flaw detection equipment
- Telecommunications equipment
- Hydro power
- Production lines
- Electric water heaters
