TPS5210DW
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 28 |
| Weight | 730.794007mg |
| Operating Temperature | 0°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS5210 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 13V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 11.4V~13V |
| Control Features | Current Limit, Enable, Power Good, Soft Start |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Control Technique | HYSTERETIC CURRENT MODE |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Switching Frequency-Max | 200kHz |
| Clock Sync | No |
| Duty Cycle | 95 % |
| Height Seated (Max) | 2.65mm |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5210DW Overview
Capsuled in the 28-SOIC (0.295, 7.50mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 11.4V~13V. Worked in a 0°C~125°C TJ dc switcher before. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Current Limit, Enable, Power Good, Soft Start. Connected to a SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. There are a DUAL terminal on the switching converters. 28 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include HYSTERETIC CURRENT MODE. It is inputted with a DC switcher's voltage of 12V. A search for "TPS5210" will reveal other relevant dc to dc converter ics. In total, switching converter has 28 pins. Switching converter is a special type of Switching Regulator or Controllers. A starting point for a project is to note down the dc dc regulator's usual output current, which is 400mA. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. To run the voltage regulator dc to dc safely and reliably, users should apply 13V to the voltage regulator dc to dc. This switching controller can switch at a frequency of 200kHz.
TPS5210DW Features
Transistor Driver Outputs
Current Limit, Enable, Power Good, Soft Start
HYSTERETIC CURRENT MODE
TPS5210DW Applications
There are a lot of Texas Instruments TPS5210DW DC to DC converter applications.
- Production lines
- Textile machinery
- Smoke prevention equipment
- Constant current circuits
- Shearing machines
- Fire elevators
- Medical equipment
- Game consoles
- Smoke exhaust equipment
- Wide-range voltage regulation circuits
