TPS53014DGSR
| Parameters | |
|---|---|
| Max Frequency | 500kHz |
| Clock Sync | No |
| Duty Cycle | 83 % |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 10 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | D-CAP2™, Eco-Mode™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53014 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 120mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~28V |
| Quiescent Current | 660μA |
| Control Features | Enable, Soft Start |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
TPS53014DGSR Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package and is ideal for most applications. This dc motor controller can be used to generate outputs with 1 numbers. The pmic is packaged in Cut Tape (CT) solid enclosure. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~28V. Suitable for work in a -40°C~85°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. The dcdc regulator features Enable, Soft Start for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 10. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Searching "TPS53014" will return other relevant dc to dc converter ics. There are a total of 10 pins on switching converter. Switching converter is a type of Switching Regulator or Controllers in particular. The minimum input voltage of the dc dc voltage regulator should be 4.5V. DC regulator outputs 7V voltage according to the test statistics. In most cases, the output current of the dc dc regulator will be 120mA, so note that when you start the project. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher's500kHz is the maximum frequency of this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V. When running the voltage regulator dc to dc in a circuit, users should apply 28V to ensure safety and reliability. The dc to dc voltage regulator belongs to the D-CAP2?, Eco-Mode? series. During dormancy, the dc switching uses 660μA.
TPS53014DGSR Features
Transistor Driver Outputs
Enable, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V
TPS53014DGSR Applications
There are a lot of Texas Instruments TPS53014DGSR DC to DC converter applications.
- Current source circuits
- Solar power plants
- Planers
- Packaging
- Smoke prevention equipment
- Ball screw pair
- Photovoltaic power
- Injection molding machinery
- Refrigerators of central air conditioners
- Production lines
