TPS53015DGS

10 Terminals 4.5V~28V 10-Pin TPS53015 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 500kHz Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS53015DGS
Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Datasheet: -
Stock: 612
Description: 10 Terminals 4.5V~28V 10-Pin TPS53015 DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 500kHz Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 4 days ago)
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins	10
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Series	D-CAP2™, Eco-Mode™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	10
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Supply Voltage	12V
Terminal Pitch	0.5mm
Base Part Number	TPS53015
Function	Step-Down
Number of Outputs	1
Output Voltage	7V
Output Type	Transistor Driver
Operating Supply Voltage	28V
Input Voltage-Nom	12V
Analog IC - Other Type	SWITCHING CONTROLLER
Operating Supply Current	660μA
Output Configuration	Positive
Output Current	120mA
Voltage - Supply (Vcc/Vdd)	4.5V~28V
Quiescent Current	660μA
Control Features	Enable, Power Good
Input Voltage (Min)	4.5V
Topology	Buck
Control Mode	VOLTAGE-MODE
Frequency - Switching	500kHz
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Isolation	Non-Isolated
Clock Sync	No
Height	1.07mm
Length	3mm
Width	3mm
Thickness	1.02mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS53015DGS Overview

As a result of 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) compact design, the switching controller is compatible with most applications. 1 outputs can be generated with the dc motor controller. An enclosure of Tube is used to package the PMIC. With this function, you can deal with Transistor Driver dc switching's outputs (s). A 4.5V~28V voltage is supplied to the dc control and used for operating it. Workable in an dc switcher where -40°C~85°C TA is the -40°C~85°C TArm. Switching can be done at 500kHz with this switching controller. dc dc regulator is made easier with Surface Mount. To provide efficient switching control, Enable, Power Good is included in the dcdc regulator. An analog IC with the SWITCHING CONTROLLER signal is connected to the switch converters. Switching converters are designed with the terminal (s) at position DUAL . There are many different types of terminations for 10. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. Searching "TPS53015" will return other relevant dc to dc converter ics. Total pins of switching converter are 10. Specifically, switching converter falls under the Switching Regulator or Controllers category. Input voltage of dc dc voltage regulator should be 4.5V. Based on the test statistics, DC regulator outputs voltage 7V. It's important to remember that the dc dc regulator's normaloutput current is 120mA, so you should note it down when starting a new project. The Surface Mount makes DC switcher suitable for most applications and prototypes. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.77 TO 7V in order to better satisfy the requirement. A circuit should contain 28V in order to ensure the voltage regulator dc to dc runs safely and reliably. The dc to dc voltage regulator belongs to the D-CAP2?, Eco-Mode? series. DC switching uses 660μA when it is dormant. Voltage 12V is required for supply. With a current supply of 660μA, it runs.