TPS53124PW

28 Terminals 4.5V~24V 28-Pin TPS53124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS53124PW
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 583
Description: 28 Terminals 4.5V~24V 28-Pin TPS53124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 week ago)
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Weight	117.508773mg
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS53124
Function	Step-Down
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	24V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	4.5V~24V
Quiescent Current	450μA
Control Features	Enable
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Max Input Voltage	24V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	760mV
Switcher Configuration	PUSH-PULL
Max Frequency	380kHz
Switching Frequency	380kHz
Clock Sync	No
Duty Cycle	89 %
Output Phases	1
Height	1.2mm
Length	9.7mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS53124PW Overview

It comes in a 28-TSSOP (0.173, 4.40mm Width) package, so switching controller can be used for most applications. For 2 outputs, the dc motor controller is appropriate. Tube solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. A 4.5V~24V voltage is supplied to the dc control and used for operating it. Suitable for work in a -40°C~85°C TA dc switcher. A generalization of dc dc regulator can be made using Surface Mount. Enable provides dcdc regulator efficient switching control. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . The 28 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS53124". Switching converter has a total of 28 pins. According to the test statistics, DC regulator outputs 5.5V voltage. If you start a project, note down the dc dc regulator's usual output current of 15A. There is a maximum frequency of 380kHz on this dc regulators. DC to DC voltage regulator has the value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V to better satisfy the requirement. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 24V. Basically, it's a dc to dc voltage regulator from the D-CAP? series. When the dc switching is dormant, it uses 450μA. The maximum input voltage of this dc switcher is 24V, so users must limit the voltage accordingly. In order to use a 4.5V voltage supply, switching controller is necessary to have one. DC switchers cannot produce output currents greater than 15A. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. A voltage controller's lowest output voltage cannot be less than 760mV. 380kHz is the frequency at which this controller performs well most of the time.