TPS53124PWR

28 Terminals 4.5V~24V 28-Pin TPS53124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS53124PWR
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: -
Stock: 823
Description: 28 Terminals 4.5V~24V 28-Pin TPS53124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	24V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	4.5V~24V
Quiescent Current	450μA
Control Features	Enable
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Max Input Voltage	24V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	760mV
Switcher Configuration	PUSH-PULL
Max Frequency	380kHz
Switching Frequency	380kHz
Clock Sync	No
Duty Cycle	89 %
Output Phases	1
Length	9.7mm
Width	4.4mm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Weight	117.508773mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	no
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS53124
Function	Step-Down

TPS53124PWR Overview

This switching controller fits most application requirements since it is packaged in a 28-TSSOP (0.173, 4.40mm Width) package. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~24V and has a 4.5V~24V supply voltage. Suitable for a -40°C~85°C TA dc switcher. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable which allows efficient switching control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. DUAL are the position of the terminal of the switching converters. The 28 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. In addition to "TPS53124", there are other relevant dc to dc converter ics you can find. 28 pins are on switching converter. The type is a particular Switching Regulator or Controllers of switching converter. Statistically, DC regulator outputs 5.5V volts. The dc dc regulator's usual output current is 15A, which should be noted down when you start a project. The max frequency of the pmic can reach 380kHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that DC to DC voltage regulator better serves the purpose. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 24V. It belongs to the dc to dc voltage regulator series D-CAP?. As long as the dc switching is in a dormant state, it utilizes 450μA. Because the dc switcher's maximum input voltage is 24V users must limit the voltage accordingly. In order to use a 4.5V voltage supply, switching controller is necessary to have one. The dc switcher will not provide an output current greater than 15A. At its maximum output, the switching converter can provide 5.5V volts. 760mV voltage output is lower than 760mV. When this switching controller is running at frequency 380kHz, it can perform well in most cases.