TPS53124RGER

24 Terminals 4.5V~24V 24-Pin TPS53124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS53124RGER
Package: 24-VFQFN Exposed Pad
Datasheet: -
Stock: 646
Description: 24 Terminals 4.5V~24V 24-Pin TPS53124 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 6 days ago)
Mounting Type	Surface Mount
Package / Case	24-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	24
Weight	45.387587mg
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm
Base Part Number	TPS53124
Function	Step-Down
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	24V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	15A
Voltage - Supply (Vcc/Vdd)	4.5V~24V
Quiescent Current	450μA
Control Features	Enable
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Max Input Voltage	24V
Control Technique	PULSE WIDTH MODULATION
Synchronous Rectifier	Yes
Min Output Voltage	760mV
Switcher Configuration	PUSH-PULL
Max Frequency	380kHz
Clock Sync	No
Duty Cycle	89 %
Output Phases	1
Height	1mm
Length	4mm
Width	4mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead

TPS53124RGER Overview

With a 24-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 4.5V~24V. Qualified to work in an dc switcher with -40°C~85°C TA. The Surface Mount allows it to be used for dc dc regulator in general. To provide efficient switching control, Enable is included in the dcdc regulator. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. switching converters terminal (s) are designed to be at QUAD. Different dc switching's functions can be applied to 24 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. DC switcher's voltage input is 12V. TPS53124 can be searched for other relevant dc to dc converter ics. There are a total of 24 pins on switching converter. Statistically, the DC regulator outputs 5.5V voltage. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. It is estimated that this dc regulatorhas a maximum frequency of 380kHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that DC to DC voltage regulator better serves the purpose. When running the voltage regulator dc to dc in a circuit, users should apply 24V to ensure safety and reliability. It belongs to the dc to dc voltage regulator series D-CAP?. DC switching uses 450μA when it is dormant. Because the dc switcher's maximum input voltage is 24V users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 4.5V. A dc switcher can only produce an output current of 15A. Its datasheet indicates the switching converter can output a maximum of 5.5V volts. voltage controllers with a minimum voltage output of 760mV cannot operate.