TPS53125PW
| Parameters | |
|---|---|
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS53125 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Enable |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.8mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 7.8mm |
TPS53125PW Overview
With its 24-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. There is sufficient capacity to generate switching controller for outputs 2. A solid enclosure of Tube surrounds pmic. The program can handle Transistor Driver dc switching's outputs (s). This dc control operates at 4.5V~24V and has a 4.5V~24V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. The Surface Mount allows it to be used for dc dc regulator in general. Enable provides dcdc regulator efficient switching control. The switch converters are connected to a DUAL SWITCHING CONTROLLER analog IC. The switching converters's terminal (s) are designed at DUAL . An array of 24 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 5.5V. Searching "TPS53125" will return other relevant dc to dc converter ics. There are a total of 24 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. DC regulator outputs 5.5V voltage based on test statistics. DC regulator350kHz has the maximum frequency. To run the voltage regulator dc to dc safely and reliably, users should apply 24V to the voltage regulator dc to dc. There are several dc to dc voltage regulator in the D-CAP2? series. During dormancy, the dc switching uses 450μA. In order to limit the voltage of a dc switcher whose maximum input voltage is 24V, it must be limited by the user. The supply voltage must be 4.5V. There will be 15A current output from the dc switcher above 15A. It is not recommended to supply more current to the controller than 0.8mA. The switching converter can output 5.5V volts at its utmost, according to the datasheet. At its lowest voltage, the voltage controller does not produce less than 760mV.
TPS53125PW Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
TPS53125PW Applications
There are a lot of Texas Instruments TPS53125PW DC to DC converter applications.
- Access control systems
- Various precision measuring detectors
- Series voltage regulation circuits
- Direct power supply system
- Automatic testing equipment
- Household control circuits
- Plate bending machines
- Large fire protection systems
- Printing
- Textile machinery
