TPS53125PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS53125 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Enable |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.8mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53125PWR Overview
With a 24-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 2 outputs. There is a Tape & Reel (TR) solid enclosure around the pmic. Transistor Driver dc switching's outputs (s) can be handled by it. A 4.5V~24V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. dc dc regulators can be carried out with Surface Mount. DCDC regulator is controlled efficiently by Enable. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. The switching converters's terminals (s) are designed at DUAL. A variety of terminations with 24 of dc switching. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5.5V. You can find other relevant dc to dc converter ics by searching "TPS53125". The switching converter has a total of 24 pins. Switching converter is a type of Switching Regulator or Controllers in particular. According to the test statistics, DC regulator outputs 5.5V voltage. There is a maximum frequency of 350kHz for this dc regulators. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 24V. Basically, it's a dc to dc voltage regulator from the D-CAP2? series. A dc switching in a dormant state uses 450μA. Because the dc switcher's maximum input voltage is 24V users must limit the voltage accordingly. Voltage 4.5V is needed for the supply. Output current will not exceed 15A. A controller's current should not exceed 0.8mA. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. At least 760mV voltage is output by the voltage controller.
TPS53125PWR Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
TPS53125PWR Applications
There are a lot of Texas Instruments TPS53125PWR DC to DC converter applications.
- Drilling machines
- Combined machine tools
- ATMs
- Surface processing equipment
- Motor controller circuits
- Computer application technology
- Production lines
- CMM
- Magnetohydrodynamic power
- Hydrogen power
