TPS53125RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53125 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Enable |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.8mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 350kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53125RGER Overview
This switching controller fits most application requirements since it is packaged in a 24-VFQFN Exposed Pad package. For 2 outputs, the dc motor controller is appropriate. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. Transistor Driver dc switching's outputs (s) are supported. 4.5V~24V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable. A DUAL SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. The switching converters's terminal (s) are designed at QUAD . A variety of 24 terminations are available in dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. DC switcher's voltage input of 5.5V. Other relevant dc to dc converter ics can be found by searching "TPS53125". 24 pins are on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 5.5V voltage based on test statistics. There is a maximum frequency of 350kHz on this dc regulators. A circuit should contain 24V in order to ensure the voltage regulator dc to dc runs safely and reliably. Thare are switch converters of the D-CAP2? series. During dormancy, the dc switching uses 450μA. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 24V. Voltage 4.5V is needed for the supply. An output current greater than 15A cannot be provided by the dc switcher. The controller should not be supplied with more current than 0.8mA. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. At least 760mV voltage is output by the voltage controller.
TPS53125RGER Features
Transistor Driver Outputs
Enable
PULSE WIDTH MODULATION
TPS53125RGER Applications
There are a lot of Texas Instruments TPS53125RGER DC to DC converter applications.
- Window air conditioners
- Television equipment
- Post equipment
- Handheld GPS
- Production lines
- Arc suppression circuits
- Lathes
- Analog precision reference circuits
- Series voltage regulation circuits
- Motor controller circuits
