TPS53126PW
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 89.499445mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 700kHz |
| Base Part Number | TPS53126 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 170mA |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Enable, Frequency Control |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 350kHz 700kHz |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.8mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53126PW Overview
With a 24-TSSOP (0.173, 4.40mm Width) package, the switching controller is suitable for a wide range of applications. 2 outputs are supported by the dc motor controller. PMIC is packaged in a solid enclosure of Tube. A total of Transistor Driver dc switching's outputs can be handled by it. 4.5V~24V is the operating voltage and supply voltage of the dc control. Qualified to work in an dc switcher with -40°C~85°C TA. It can switch at 350kHz 700kHz. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Enable, Frequency Control for efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at DUAL. 24 terminations with a variety of function. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 12V. TPS53126 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 24 pins. In particular, switching converter is a type of Switching Regulator or Controllers. According to the test statistics, DC regulator outputs 5.5V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 170mA. The switching controller works at a frequency of 700kHz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V in order to better satisfy the requirement. Basically, it's a dc to dc voltage regulator from the D-CAP2? series. DC switching uses 450μA when it is dormant. The maximum input voltage of this dc switcher is 24V, so users must limit the voltage accordingly. Voltage 4.5V is needed for the supply. Input current cannot exceed 15A with this dc switcher. It is not recommended to supply more current to the controller than 0.8mA. As per its datasheet, the switching converter has a maximum output of 5.5V volts. The voltage controller's lowest voltage output is not less than 760mV.
TPS53126PW Features
Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
Frequency: 700kHz
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53126PW Applications
There are a lot of Texas Instruments TPS53126PW DC to DC converter applications.
- Driver circuits
- Various CNC machine tools
- Game consoles
- Network technology
- Combined machine tools
- Product burn-in
- Correction machines
- Photovoltaic power
- Hydro power
- Linear guide
