Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Mounting Type |
Surface Mount |
Package / Case |
24-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
24 |
Weight |
89.499445mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Series |
D-CAP2™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
2 (1 Year) |
Number of Terminations |
24 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Additional Feature |
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.65mm |
Base Part Number |
TPS53126 |
Function |
Step-Down |
Number of Outputs |
2 |
Output Voltage |
5.5V |
Output Type |
Transistor Driver |
Max Output Current |
15A |
Input Voltage-Nom |
12V |
Analog IC - Other Type |
DUAL SWITCHING CONTROLLER |
Output Configuration |
Positive |
Output Current |
15A |
Voltage - Supply (Vcc/Vdd) |
4.5V~24V |
Quiescent Current |
450μA |
Control Features |
Enable, Frequency Control |
Max Output Voltage |
5.5V |
Topology |
Buck |
Min Input Voltage |
4.5V |
Frequency - Switching |
350kHz 700kHz |
Max Input Voltage |
24V |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
Yes |
Min Output Voltage |
760mV |
Switcher Configuration |
PUSH-PULL |
Max Frequency |
700kHz |
Clock Sync |
No |
Duty Cycle |
89 % |
Output Phases |
1 |
Height |
1.2mm |
Length |
7.8mm |
Width |
4.4mm |
Thickness |
1mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS53126PWR Overview
With its 24-TSSOP (0.173, 4.40mm Width) package, the switching controller fits the needs of most applications. There is enough capacity in the dc motor controller to generate the output for the 2 input. Tape & Reel (TR) is the solid enclosure in which PMIC is packaged. With Transistor Driver dc switching's output (s), it is able to handle it. This dc control operates at 4.5V~24V and has a 4.5V~24V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. With this switching controller, you can switch at 350kHz 700kHz. dc dc regulators can be carried out with Surface Mount. The dcdc regulator features Enable, Frequency Control for efficient switching control. Switch converters are connected to ICs with DUAL SWITCHING CONTROLLER analog outputs. There are a terminal (s) on the switching converters that are designed at DUAL. A variety of dc switching's functions can be performed on 24 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. You can find other relevant dc to dc converter ics by searching "TPS53126". There are a total of 24 pins on switching converter. A 5.5V voltage of DC regulator was detected in the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 15A. The max frequency of the pmic can reach 700kHz. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V in order to better satisfy the requirement. Basically, it's a dc to dc voltage regulator from the D-CAP2? series. Dormant dc switchings use 450μA. The dc switcher's maximum input voltage is 24V, so users must limit the voltage accordingly. Voltage 4.5V is necessary for the supply. Output current will not exceed 15A. At its maximum output, the switching converter can provide 5.5V volts. Lowest voltage output of the voltage controller must be greater than 760mV.
TPS53126PWR Features
Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53126PWR Applications
There are a lot of Texas Instruments TPS53126PWR DC to DC converter applications.
- Domestic water pumps
- Linear guide
- Solar power plants
- Driver circuits
- Series voltage regulation circuits
- Bending machines
- Smart grid
- Gear/thread machining machines
- Low output voltage switching power supply circuits
- seismic instrument power circuits