TPS53126RGER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53126 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Enable, Frequency Control |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 350kHz 700kHz |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.8mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 700kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53126RGER Overview
With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. 2 outputs can be generated with the dc motor controller. PMIC is packaged in a solid enclosure of Tape & Reel (TR). It is capable of handling Transistor Driver dc switching's outputs (s). Voltages 4.5V~24V are the dc control's supply voltage and operating voltage, respectively. A -40°C~85°C TA dc switcher is not a problem. This switching controller can switch at 350kHz 700kHz. Surface Mount makes it suitable for general dc dc regulator. For efficient switching control, the dcdc regulator features Enable, Frequency Control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Terminal (s) of the switching converters are designed at the QUAD position. A variety of 24 terminations are available in dc switching. It includes PULSE WIDTH MODULATION as one of the control techniques dc dc converter ic adapts. It is inputted with a DC switcher's voltage of 12V. You can find other relevant dc to dc converter ics by searching "TPS53126". There are only 24 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. Test statistics indicate DC regulator outputs 5.5V voltage. If you start a project, note down the dc dc regulator's usual output current of 15A. There is a maximum frequency of 700kHz for this dc regulators. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that the need can be met more directly. The dc to dc voltage regulator is from the D-CAP2? series. Dormant dc switchings use 450μA. The maximum input voltage of this dc switcher is 24V, so users must limit the voltage accordingly. Voltage 4.5V is needed for the supply. Input current cannot exceed 15A with this dc switcher. There should be 0.8mA current exceeding 0.8mA supplied to the controller. As per its datasheet, the switching converter has a maximum output of 5.5V volts. voltage controllers with a minimum voltage output of 760mV cannot operate.
TPS53126RGER Features
Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53126RGER Applications
There are a lot of Texas Instruments TPS53126RGER DC to DC converter applications.
- Handheld GPS
- Hydrogen power
- Communication system
- Electrical distribution systems
- Cutting machine tools
- Bending machines
- Scientific testing
- Smoke exhaust equipment
- Industrial controllers
- Automatic testing equipment
